Excavator Parts Supplier
- Home
- /
- Excavator Bucket Teeth Replacement
Excavator Bucket Teeth Replacement
Racer Machinery
The excavator bucket teeth are the terminal of the excavator working device. During excavation operations, the bucket teeth are the most load-bearing working component and are consumables, especially in stone construction environments where the wear rate of the bucket teeth is particularly fast. When the tip of the bucket teeth is severely worn, the force required for the excavator to cut in during excavation operations will inevitably increase significantly, resulting in greater fuel consumption and affecting work efficiency. Therefore, it is necessary to replace the bucket teeth with new ones in a timely manner when severe wear and tear is detected.
The replacement steps for excavator bucket teeth are as follows:
Remove old teeth: Use appropriate tools to loosen the bolts or pins of the teeth, and remove the old teeth one by one from the bucket or bucket.
Clean the installation area: Ensure that there is no residue on the base and teeth slots.
Place new teeth: Place the new bucket teeth in the correct position.
Adjust the position and angle of the new teeth.
Test the working effect of the new teeth.
It should be noted that since the worn and failed part of the bucket teeth is the tooth tip, only the tooth tip needs to be replaced. In addition, the working face of the bucket tooth is in contact with the excavated object, and its stress situation varies at different working stages during a complete excavation process, so special attention needs to be paid to stress analysis.
Perhaps you are looking for information about the "Excavator Bucket Teeth Replacement". We are a company specializing in supplying excavator parts. We can provide excavator parts products from different brands. For example, undercarriage parts sprocket, Engine Assy, PC300-7 front idler assy, pc300-5 engine S6D108, and so on.
We have been engaged in the sales of excavator parts for many years, and as a professional excavator parts supplier, our products are exported to countries or regions such as Qatar, Sofia (Bulgaria), Bergen (Norway), and so on. No matter which brand of excavator undercarriage parts, engine parts, hydraulic parts, work equipments, swing system, operate cab parts and other excavator parts or equipments you need. We can all deliver it to you.
If you want to konw more about Excavator Bucket Teeth Replacement, or cooperate with us, you can directly contact us.