An excavator bucket is a crucial attachment used for digging, loading, and moving materials in construction and excavation projects. It consists of several key components that work together to perform these tasks effectively. Here are the main parts of an excavator bucket:Bv1R

1. Cutting Edge: The cutting edge is the front edge of the bucket, which makes initial contact with the ground or material being excavated. It is usually made of hardened steel and helps penetrate the ground or material for efficient digging.Bv1R

2. Side Plates: Side plates are the vertical plates that form the sides of the bucket. They provide structural support and help contain the material being excavated within the bucket.Bv1R

3. Bottom Plate: The bottom plate, also known as the base plate or floor plate, is the horizontal plate at the bottom of the bucket. It supports the load and helps retain the excavated material.Bv1R

4. Teeth: Teeth are replaceable attachments that are mounted onto the cutting edge or adapters on the bucket. They enhance penetration and digging capabilities by providing extra cutting power. The teeth can come in various shapes and sizes depending on the specific application and material being excavated.Bv1R

5. Adapters: Adapters, also known as tooth adapters or shanks, are the components that hold the teeth in place on the bucket. They are typically welded or bolted onto the bucket and provide a secure attachment point for the teeth.Bv1R

6. Wear Plates: Wear plates, also called wear strips or wear bars, are additional protective plates that are often attached to the bottom plate and cutting edge of the bucket. They are made of hardened steel and help protect the bucket from excessive wear and extend its lifespan.Bv1R

7. Lip Shrouds: Lip shrouds, also known as bucket shrouds or lip protectors, are wear-resistant plates that cover the lower part of the bucket's cutting edge. They provide added protection against wear and damage during digging operations.Bv1R

8. Bucket Pins and Bushings: Bucket pins and bushings are the pivot points that allow the bucket to articulate and move. They connect the bucket to the excavator's boom and arm assembly and enable the bucket to be tilted, rotated, or curled.Bv1R

Price ranges

The price range for excavator bucket parts can vary depending on several factors, including the brand, size, quality, and specific component being purchased. Here is a rough estimate of the price range for some common excavator bucket parts:Bv1R

1. Cutting Edge: The price range for a cutting edge can vary from approximately $100 to $500 or more, depending on the size and material (e.g., hardened steel) used.Bv1R

2. Teeth: Replacement teeth for excavator buckets can range in price from around $50 to $200 per tooth, depending on the brand, type, and size.Bv1R

3. Adapters: Adapters for bucket teeth can range in price from approximately $50 to $150 or more, depending on the size, brand, and specific design.Bv1R

4. Wear Plates: The price range for wear plates can vary from around $100 to $500 or more, depending on the size, material, and quality.Bv1R

5. Lip Shrouds: Lip shrouds for bucket protection can range in price from approximately $50 to $200 or more, depending on the size, material, and brand.Bv1R

6. Bucket Pins and Bushings: The price range for bucket pins and bushings can vary depending on the size and quality. Typically, prices can range from around $50 to $200 or more per set.Bv1R

Please note that these price ranges are approximate and can vary significantly based on factors such as the specific brand, quality, size, and the supplier or dealer from which the parts are purchased. It is advisable to consult with authorized dealers or suppliers specializing in excavator bucket parts for accurate and up-to-date pricing information based on your specific requirements.Bv1R